D 1.3 19
D_1
.3_0
1_G
B.
fm
1
9
-2
4
Item Designation
Brief description
43
Oil pressure indica-
tor for the hydraulic
traction drive (red)
It must go out soon after start-up. Consider the time of warm-
ing up. The hydraulic oil may be too cold and rigid.
m
If the light does not go dark, do not turn on the trac-
tion drive.
A
The lamp goes out at a pressure of 2.8 bar = 40 psi.
44
Oil pressure indica-
tor for the Diesel en-
gine (red)
m
It is on, when the oil pressure is too low.
Stop the engine immediately!
For additional faults, see operating instructions for the
engine.
A
The fault is indicated together with the „Error mes-
sage“ light.
45
Control light
differential lock
It is on, when the differential lock is engaged.
A
In working speed the differential lock is automatically
engaged.
46
Battery indicator light
(red).
It must go out after start-up at a higher speed.
- Stop the engine.
47
„Parking brake“ light
(red)
It is on when parking brake is active.
A
When the machine is stopped, the parking brake is
automatically engaged.
A
When the drive lever is moved, the parking brake is
automatically released.
48
has no function
49
Service hour meter
The service hours are counted by the machine with running
engine.
Daily maintenance of the paver finisher (see chapter F)
50
Fuel gauge
Continuously observe the fuel gauge.
m
The gas oil tank may never go empty! Otherwise, the
entire fuel system must be bled (vented).
51
has no function
52
RPM meter (
o
)
The speed is displayed in revolutions per minute (rev/min).
A
The RPM can be modified with the speed regulator.
53
Fuse box I.
A
For assignment of fuse strips, refer to chapter F.
54
Fuse box II.
A
For assignment of fuse strips, refer to chapter F.
Summary of Contents for Svedala Demag DF 115 P/D
