Dynapac Svedala Demag DF 115 P/D, Operation & Maintenance Manual

Page: 54 / 234

C 1.0 10
C_1
.0_0
1_G
B.
fm
1
0
-1
2
5 Towing
f
Heed all regulations and apply all safety measures applicable for towing heavy con-
struction machines.
m
The towing vehicle must be capable of securing the paver, even on slopes.
Use only approved tow bars!
If necessary, remove any attachments and accessories from the paver finisher and
the screed until the basic width has been attained.
The engine compartment holds a hand-pump on the LH side, which must be actuated
to permit the towing of the machine.
Pressure for releasing the traction system brakes is built up with the hand pump.
m Only release the traction system brakes
when the machine is sufficiently secured
against accidental rolling or is already
properly connected to the towing vehi-
cle.
- The two high pressure cartridges (1)
of the pumps of the traction drive must
be driven out by about 3 turns.
- Release lock nut (2), screw threaded
dowel (3) into pump as far as possible
and secure with lock nut.
- Actuate lever (4) of hand pump until
sufficient pressure has been built up
and traction system brakes have been
released.
- Attach the tow bar to the coupling (5)
located in the bumper.
A
Now carefully and slowly tow the paver
finisher out of the construction area.
m Always only tow the shortest distance to
the means of transport or the next park-
ing possibility.
Pump634.jpg
1
Pump
4
3
2
X