Dynapac Svedala Demag DF 115 P/D, Operation & Maintenance Manual

Page: 187 / 234

F 7.4 3
F_7
.4_
01_G
B.
fm
3-
6
1.2 Points of maintenance
Planetary gear (1)
- For checking the oil level unscrew
the inspection plug (A).
A
In case of proper oil level, the oil is at the
lower edge of the inspection port (A) or a
little oil flows from the hole.
For filling in the oil:
- Remove the inspection plug (A) and
filling plug (B).
- Fill oil of the correct specification
through the filling hole (B) until the oil
level reaches the lower edge of the in-
spection hole (A).
- Replace the inspection plug (A) and
filling plug (B).
Oil change:
A
Change the oil when the engine is at op-
erating temperature.
m
Make sure that no pollution or foreign
matter gets into the drive.
- Stop the machine so that the “TOP” is at the topmost position and the drain plug
(C) is at the bottom.
- Unscrew the drain plug (C) and the filling plug (B) and drain the oil.
- Check and replace the seals of both screw plugs.
- Return drain plug (C).
- Remove the inspection plug (A).
- Fill oil of the correct specification through the filling hole (B) until the oil level reach-
es the lower edge of the inspection hole (A).
- Replace the inspection plug (A) and filling plug (B).
Pgear634.bmp
B
C
A