Dynapac CA282D, Instruction Manual

Page: 82 / 119

Maintenance - Maintenance schedule
ICA282-1EN3.pdf 2012-06-18
Every 500 hours of operation (Every three
months)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
3 Replace the fuel filter Refer to the engine manual 3 Replace the fuel filter Refer to the engine manual
5 Lubricate controls and joints 5 Lubricate controls and joints
3 Clean the fuel pre-filter. 3 Clean the fuel pre-filter.
25 Change the engine oil and oil filter Refer to the engine manual 25 Change the engine oil and oil filter Refer to the engine manual
36 Grease the steering chain Optional 36 Grease the steering chain Optional
35 Grease the chair bearing Optional 35 Grease the chair bearing Optional
Every 1000 hours of operation (Every six
months)
Refer to the contents to find the page number of the
sections referred to !
Pos. in fig Action Comment Pos. in fig Action Comment
7 Check bleeder filter on hydraulic reservoir 7 Check bleeder filter on hydraulic reservoir
8 Change the hydraulic fluid filter 8 Change the hydraulic fluid filter
9 Drain the condensate from hydraulic reservoir 9 Drain the condensate from hydraulic reservoir
26 Drain condensate from fuel tank 26 Drain condensate from fuel tank
22 Change oil in rear axle differential 22 Change oil in rear axle differential
23 Change oil in the rear axle planetary gearing 23 Change oil in the rear axle planetary gearing
38 Replace the fresh air filter in the cab Optional 38 Replace the fresh air filter in the cab Optional
Check engine valve clearances Refer to the engine manual Check engine valve clearances Refer to the engine manual
33 Check belt tension in the drive belt system Refer to the engine manual 33 Check belt tension in the drive belt system Refer to the engine manual
72