Dynapac CA282D, Instruction Manual

Page: 59 / 119

Operation
ICA282-1EN3.pdf 2012-06-18
11 12
30
Fig. Instrument panel
11. Hydraulic oil temperature (Optional)
12. Engine temperature (Optional)
30. Warning lamp, air filter
Check while driving that the gauges show normal
readings. In the event of abnormal values or if the
buzzer sounds, immediately stop the roller and the
diesel engine. Check and remedy any fault; see also
the chapter on maintenance and the engine manual.
If the warning lamp for the air filter (30) comes on
during operation (when the diesel engine is
running at full speed), the main filter must be
cleaned or replaced. See the Maintenance
Manual. If the warning lamp for the air filter (30) comes on
during operation (when the diesel engine is
running at full speed), the main filter must be
cleaned or replaced. See the Maintenance
Manual.
Operating on difficult surfaces (Optional)
Drive, drum/wheels
35
Fig. Control panel
35. Speed selector, drum/wheels
(Optional)
2. Position 2
3. Position 3
2 3
If the machine should get stuck and it is equipped with
a 2-speed drum drive, set the drive knob as shown
below.
If the drum spins: Turn the knob (35) to Position 2
If the rear tires spin: Turn the knob (35) to Position 3.
When the machine has regained its grip set the knobs
in their original positions.
49