Dynapac CA282D, Instruction Manual

Page: 62 / 119

Operation
ICA282-1EN3.pdf 2012-06-18
Switching off
2
1
Fig. Instrument panel
1. Starter switch
2. Panel for warning lamps
Check instruments and warning lamps to see if any
faults are indicated. Switch off all lights and other
electrical functions.
Turn the starter switch (1) to the left to the shut off
position. On rollers without a cab, lower and lock the
instrument cover.
Parking
Chocking the drums
Fig. Arrangement
1. Chock
1
Never disembark from the machine when the is
engine running, unless the emergency/parking
brake knob is depressed. Never disembark from the machine when the is
engine running, unless the emergency/parking
brake knob is depressed.
Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
if the roller is parked on sloping ground. Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
if the roller is parked on sloping ground.
Remember the risk of freezing during the winter.
Fill the engine cooling system and the
screenwash bottle in the cab with suitable
anti-freeze mixtures. See also the maintenance
instructions. Remember the risk of freezing during the winter.
Fill the engine cooling system and the
screenwash bottle in the cab with suitable
anti-freeze mixtures. See also the maintenance
instructions.
Master switch
1
Fig. Tractor frame, rear left
1. Master switch
Before leaving the roller for the day, switch the master
switch (1) to the disconnected position and remove the
handle.
This will prevent battery discharging and will also
make it difficult for unauthorized persons to start and
operate the machine. Lock the engine compartment
doors.
52