Dynapac CA282D, Instruction Manual

Page: 48 / 119

Machine description
ICA282-1EN3.pdf 2012-06-18
Fuses in cab
Fig. Cab roof fuse box
1. Air conditioning, condensor
fans
20A 1. Air conditioning, condensor
fans
20A
2. Front cab headlight, Radio 10A 2. Front cab headlight, Radio 10A
3. Cab interior lighting 5A 3. Cab interior lighting 5A
4. Air-Conditioning fan 25A 4. Air-Conditioning fan 25A
5. Rear screen wiper/washer 10A 5. Rear screen wiper/washer 10A
6. Front screen wiper/washers 10A 6. Front screen wiper/washers 10A
1 2 3 4 5 6
The electrical system in the cab has a separate fuse
box located on the front right side of the cab roof.
The figure shows fuse amperage and function.
All fuses are flat pin fuses.
Main fuses
Fig. Engine compartment
1. Starter relay
2. Main fuses
3. Preheating relays
3
1
2
There are four main fuses (2). They are located behind
the battery master disconnect switch. The three
screws need to be unscrewed to remove the plastic
cover.
The fuses are of flat pin type.
The starter relay (1) and preheating relays (3) for the
diesel engine are also fitted here.
Supply standard 30A (Green) Supply standard 30A (Green)
Supply cab * 50A (Red) Supply cab * 50A (Red)
Supply lighting * 40A (Orange) Supply lighting * 40A (Orange)
Supply, Air conditioning* 30A (Green) Supply, Air conditioning* 30A (Green)
* Optional equipment * Optional equipment
38