Dynapac CA282D, Instruction Manual

Page: 52 / 119

Operation
ICA282-1EN3.pdf 2012-06-18
Control unit - Setting
1
5
2
4
3
Fig. Operator's station
1. Locking lever - rotation (Optional)
2. Locking lever - steering column
angle
3. Locking lever - length adjustment
4. Lever - backrest slope
5. Lever - weight adjustment
The control unit has two adjustment options, rotation
and steering column angle.
Pull the lever (1) upwards to allow rotation.
Release the locking lever (2) to adjust the steering
column to the desired slope and then lock the steering
column in its new position.
The seat can be adjusted as follows:
- Length adjustment (3)
- Back slope (4)
- Weight adjustment (5)
Always make sure that the seat is secure before
beginning operation. Always make sure that the seat is secure before
beginning operation.
Operator’s seat in cab - Adjusting
6
4
2
1
3
5
Fig. Operator’s seat
1. Lever - length adjustment
2. Wheel - height adjustment
3. Wheel - seat cushion inclination
4. Wheel - backrest inclination
5. Wheel - armrest inclination
6. Wheel - lumbar support
adjustment
The control unit has three adjustment options,
transverse travel, rotation and steering column angle.
Adjust the operator's seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted as follows:
- Length adjustment (1)
- Height adjustment (2)
- Seat-cushion inclination (3)
- Backrest inclination (4)
- Armrest inclination (5)
- Lumbar support adjustment (6)
Always ensure that the seat is locked in position
before operating the roller. Always ensure that the seat is locked in position
before operating the roller.
42