Dynapac CA282D, Instruction Manual

Page: 111 / 119

Maintenance - 1000h
ICA282-1EN3.pdf 2012-06-18
Rear axle's planetary gears - Oil change - Oil
filling
Fig. Oil filling - planetary gear, std
1. Level/Filler plug
Fig. Oil filling - planetart gear, optional
1. Level/Filler plug
1
1
Set the roller so that the plug (1) in the planetary gear
is at "9 o' clock".
Wipe clean and remove the plug (1).
Fill with oil to the lower edge of the level hole. Use
transmission oil. See lubrication specification.
Clean and refit the plug (1).
Fill with oil in the same way as for the rear axle's
second planetary gear.
Air conditioning (Optional)
Fresh air filter - Change
Fig. Cab
1. Fresh air filter
2. Screw (x2)
1
2 2
Use a step ladder to reach the filter (1). The filter
can also be accessed via the right cab window. Use a step ladder to reach the filter (1). The filter
can also be accessed via the right cab window.
Loosen the two screws (2) on the cab's right side.
Take down the whole holder and remove the filter
insert.
Replace with a new filter.
It may be necessary to change the filter more often if
the machine is working in a dusty environment.
101