Dynapac CA282D, Instruction Manual

Page: 42 / 119

Machine description
ICA282-1EN3.pdf 2012-06-18
No Designation Symbol Function No Designation Symbol Function
15 Fuel gauge Shows level in the fuel tank. 15 Fuel gauge Shows level in the fuel tank.
16 Preheating lamp Lights up when the diesel engine is being preheated
and the switch is in position I. 16 Preheating lamp Lights up when the diesel engine is being preheated
and the switch is in position I.
17 Reserve 17 Reserve
18 Fault indicating lamp, "Minor
fault" Indicates fault and shows error code together with knob
19. See error codes under tab X in machine folder. 18 Fault indicating lamp, "Minor
fault" Indicates fault and shows error code together with knob
19. See error codes under tab X in machine folder.
19 Diagnostics "ON" Check error code together with lamp 18 and 20. 19 Diagnostics "ON" Check error code together with lamp 18 and 20.
20 Browse in error codes Turning to right (+): Stepping forward. 20 Browse in error codes Turning to right (+): Stepping forward.
Turning to left (-): Stepping backwards. Turning to left (-): Stepping backwards.
21 Speedometer (Optional). The outer scale shows speed in km/h.
The inner scale shows speed in mph. 21 Speedometer (Optional). The outer scale shows speed in km/h.
The inner scale shows speed in mph.
22 Fault indicating lamp, "Serious
fault" Stop the engine. 22 Fault indicating lamp, "Serious
fault" Stop the engine.
23 Engine speed control for Diesel
engine 900 = Idling speed
1,500 = Speed for loading/unloading
2,200 = Working and transport speed 23 Engine speed control for Diesel
engine 900 = Idling speed
1,500 = Speed for loading/unloading
2,200 = Working and transport speed
24 Amplitude selector. Left mode gives low amplitude. 24 Amplitude selector. Left mode gives low amplitude.
In the 0 position, the vibration system is switched off. In the 0 position, the vibration system is switched off.
Right mode gives high amplitude. Right mode gives high amplitude.
25 CMV selector (Optional). Mode 150 gives reading on outer scale.
Mode 50 gives reading on inner scale. 25 CMV selector (Optional). Mode 150 gives reading on outer scale.
Mode 50 gives reading on inner scale.
26 Hourmeter Engine running time is shown in hours. 26 Hourmeter Engine running time is shown in hours.
27 Brake warning lamp The lamp come on when the parking or emergency
brake knob is depressed and the brakes are applied. 27 Brake warning lamp The lamp come on when the parking or emergency
brake knob is depressed and the brakes are applied.
28 Warning lamp, oil pressure The lamp comes on if the engine oil pressure is too low.
Stop the engine immediately and locate the fault. 28 Warning lamp, oil pressure The lamp comes on if the engine oil pressure is too low.
Stop the engine immediately and locate the fault.
29 Warning lamp, hydraulic filter If the lamp comes on while the engine is running at full
speed, the hydraulic filter must be changed. 29 Warning lamp, hydraulic filter If the lamp comes on while the engine is running at full
speed, the hydraulic filter must be changed.
30 Warning lamp, air filter If the lamp comes on while the engine is running at full
speed, the air filter must be cleaned or replaced. 30 Warning lamp, air filter If the lamp comes on while the engine is running at full
speed, the air filter must be cleaned or replaced.
31 Warning lamp, battery charging If the lamp comes on while the engine is running, the
alternator is not charging.
Stop the engine and locate the fault. 31 Warning lamp, battery charging If the lamp comes on while the engine is running, the
alternator is not charging.
Stop the engine and locate the fault.
32 Warning lamp, hydraulic fluid
temperature If the lamp comes on, the hydraulic fluid is too hot.
Do not drive the roller. Cool the fluid by allowing the
engine to idle and locate the fault. 32 Warning lamp, hydraulic fluid
temperature If the lamp comes on, the hydraulic fluid is too hot.
Do not drive the roller. Cool the fluid by allowing the
engine to idle and locate the fault.
32