Dynapac CA282D, Instruction Manual

Page: 115 / 119

Maintenance - 2000h
ICA282-1EN3.pdf 2012-06-18
Drum gearbox - Oil change
Fig. Drum gearbox
1. Drain plug
2. Filler plug
3. Level plug
1
2
3
Place the roller on a level surface with the plugs (1)
and (2) as illustrated.
Wipe clean, unscrew the plugs (1, 2 and 3) and drain
the oil into a suitable receptacle, capacity about 3.5
liters (1 gal.).
Refit the plug (1) and fill with oil up to the level plug
(3), according to "Drum gearbox - Checking the oil
level".
Use transmission oil according to the lubricant
specification.
Clean and refit the level plug (3) and filler plug (2).
Forward/Reverse lever
- Lubrication
Fig. Forward/Reverse lever
1. Screw
2. Plate
3. Cam disc
3 2
1
Remove the screws (1) and take off the plate (2).
Grease the contact surface on the cam disc (3).
Refit the plate (2) with the screws (1).
105