Dynapac CA270, Instruction Manual

Page: 41 / 99

Operation
ICA270-IN2EN1.pdf 2012-11-05
Operation
Before starting
Master switch - Switching on
1
Fig. Engine house
1. Battery disconnection switch
Remember to carry out daily maintenance. Refer to
the maintenance instructions.
The master switch is located in the engine
compartment. Open the engine cover and set the key
(1) to the ON position. The entire roller is now supplied
with power.
The engine hood must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary. The engine hood must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary.
Driver seat (Std.) - Adjustment
1
Fig. Operator's seat
1. Length adjustment
Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted lengthways (1).
33