Dynapac CA270, Instruction Manual

Page: 34 / 99

Machine description
ICA270-IN2EN1.pdf 2012-11-05
No Designation Symbol Function No Designation Symbol Function
17. Hazard beacon, switch
(Optional) Where depressed, the hazard beacon is on 17. Hazard beacon, switch
(Optional) Where depressed, the hazard beacon is on
18. Direction indicators,
switch (Optional) When depressed to the left, the left direction
indicators are on etc. In the middle position the
function is shut off. 18. Direction indicators,
switch (Optional) When depressed to the left, the left direction
indicators are on etc. In the middle position the
function is shut off.
19. Horn, switch Press to sound the horn. 19. Horn, switch Press to sound the horn.
20. Amplitude High/Low,
Vibration On Low Amplitude Activate the vibration together with
the circuit breaker on forward/back control. 20. Amplitude High/Low,
Vibration On Low Amplitude Activate the vibration together with
the circuit breaker on forward/back control.
Vibration switched off. Vibration switched off.
Amplitude, high Activate the vibration together with
the circuit breaker on forward/back control. Amplitude, high Activate the vibration together with
the circuit breaker on forward/back control.
21. Anti spin Forward/Equal
share/Back (Optional) Roller spinning symbol = less distribution of power
to the roller. 21. Anti spin Forward/Equal
share/Back (Optional) Roller spinning symbol = less distribution of power
to the roller.
Mid position = Equal distribution of power
forward/back. Mid position = Equal distribution of power
forward/back.
Wheel spinning symbol =Less distribution of power
to the roller. Wheel spinning symbol =Less distribution of power
to the roller.
22. Control panel 22. Control panel
23. Warning lamp, low fuel level This lamp lights when the fuel level in the diesel
tank is too low. 23. Warning lamp, low fuel level This lamp lights when the fuel level in the diesel
tank is too low.
24. Warning lamp, oil pressure This lamp lights if the lubricating pressure in the
engine is too low. Stop the engine immediately and
locate the fault. 24. Warning lamp, oil pressure This lamp lights if the lubricating pressure in the
engine is too low. Stop the engine immediately and
locate the fault.
25. Warning lamp, parking brake The lamp lights when the parking brake is
activated. 25. Warning lamp, parking brake The lamp lights when the parking brake is
activated.
26. Fuel level Shows the fuel level in the diesel tank. 26. Fuel level Shows the fuel level in the diesel tank.
27. Warning lamp, water
temperature The light comes on if the water temperature is too
high. 27. Warning lamp, water
temperature The light comes on if the water temperature is too
high.
28. Warning lamp, battery
charging If the lamp lights while the engine is running the
alternator is not charging. Stop the engine and
locate the fault. 28. Warning lamp, battery
charging If the lamp lights while the engine is running the
alternator is not charging. Stop the engine and
locate the fault.
30. Hourmeter Shows the number of hours the engine has run. 30. Hourmeter Shows the number of hours the engine has run.
31. Parking brake On/Off, switch Push in to activate the parking brake, the machine
stops with the engine running.
Always use the
parking brake when the machine is stationary
on a sloping surface.
31. Parking brake On/Off, switch Push in to activate the parking brake, the machine
stops with the engine running.
Always use the
parking brake when the machine is stationary
on a sloping surface.
32. Transport mode/Traction
control (Optional) Transport mode.
Traction control mode (TC): Activate this function
together with the power distribution selector switch.
32. Transport mode/Traction
control (Optional) Transport mode.
Traction control mode (TC): Activate this function
together with the power distribution selector switch.
33. Engine speed control Turn the lever backwards and release it into the
groove to set engine speed to operating speed.
To select idling speed, move the lever to forward
end position. 33. Engine speed control Turn the lever backwards and release it into the
groove to set engine speed to operating speed.
To select idling speed, move the lever to forward
end position.
26