Dynapac CA270, Instruction Manual

Page: 74 / 99

Maintenance, 10h
ICA270-IN2EN1.pdf 2012-11-05
Hydraulic reservoir - Check fluid level
Fig. Sight glass hydraulic reservoir
1. Sight glass
1
2
The sight glass is located on the right-hand side of the
roller behind the operator's seat.
Place the roller on a flat surface and check the fluid
level in the sight glass (1). If the level is too low, top up
with the type of hydraulic fluid specified in the lubricant
specification.
Brakes - Check
Check operation of the brakes as follows: Check operation of the brakes as follows:
Checking the emergency stop
Fig. Instrument panel
1. Emergency stop
2. Parking brake lamp
1
2
Drive the roller slowly forward. Hold the steering wheel
firmly and brace yourself for a sudden stop.
Press the emergency stop (1). The roller will stop
abruptly and the engine will be switched off.
After testing the brakes, set the forward/reverse lever
in neutral.
Pull out the emergency stop (1). Start the engine.
The roller is now ready for operation.
Refer also to the section in the manual on operation.
66