Dynapac CA270, Instruction Manual

Page: 33 / 99

Machine description
ICA270-IN2EN1.pdf 2012-11-05
Function description
No Designation Symbol Function No Designation Symbol Function
1. Starter switch Positions 1-2: Shut off position, key can be
removed. 1. Starter switch Positions 1-2: Shut off position, key can be
removed.
Position 3a: All instruments and electric controls
are supplied with power. Position 3a: All instruments and electric controls
are supplied with power.
Position 3c: Starter motor activation. Position 3c: Starter motor activation.
3. Emergency stop When pressed, the emergency stop is activated.
The brake is applied and the engine stops. Brace
yourself for a sudden stop. 3. Emergency stop When pressed, the emergency stop is activated.
The brake is applied and the engine stops. Brace
yourself for a sudden stop.
4. Vibration On/Off. Switch When the circuit breaker is pressed in and
released the vibrations are connected up. Press
again and the vibrations are disconnected. High or
low amplitude must first be chosen on the
instrument panel. 4. Vibration On/Off. Switch When the circuit breaker is pressed in and
released the vibrations are connected up. Press
again and the vibrations are disconnected. High or
low amplitude must first be chosen on the
instrument panel.
5. Handbook compartment Pull up and open the top of the compartment for
access to handbooks. 5. Handbook compartment Pull up and open the top of the compartment for
access to handbooks.
6. Forward/Reverse lever The lever must be in neutral to start the diesel
engine. The engine cannot be started if the lever is
in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is
moved forward, the roller moves forward etc.
The roller's speed is proportional to the distance
the lever is from the neutral position. The further
the lever is from the neutral position, the higher the
speed. 6. Forward/Reverse lever The lever must be in neutral to start the diesel
engine. The engine cannot be started if the lever is
in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is
moved forward, the roller moves forward etc.
The roller's speed is proportional to the distance
the lever is from the neutral position. The further
the lever is from the neutral position, the higher the
speed.
7. Seat switch Remain seated at all times when operating the
roller. If the operator stands up during operation, a
buzzer sounds. After 3 seconds the brakes are
activated and the engine stops. 7. Seat switch Remain seated at all times when operating the
roller. If the operator stands up during operation, a
buzzer sounds. After 3 seconds the brakes are
activated and the engine stops.
8. Fuse box (on control column) Contains fuses for the electrical system. See under
the heading ‘Electrical system’ for a description of
fuse functions. 8. Fuse box (on control column) Contains fuses for the electrical system. See under
the heading ‘Electrical system’ for a description of
fuse functions.
9. Instrument cover Lowered over the instrument plate to protect the
instruments from the weather and sabotage.
Lockable 9. Instrument cover Lowered over the instrument plate to protect the
instruments from the weather and sabotage.
Lockable
11. Temperature gauge,
hydraulic fluid. Shows hydraulic fluid temperature.
Normal temperature range is 65°-80°C
(149°-176°F).
Stop the engine if the gauge shows a temperature
of more than 85°C (185°F). Locate the fault. 11. Temperature gauge,
hydraulic fluid. Shows hydraulic fluid temperature.
Normal temperature range is 65°-80°C
(149°-176°F).
Stop the engine if the gauge shows a temperature
of more than 85°C (185°F). Locate the fault.
12. Warning lamp, air filter If the lamp comes on while the engine is running at
full speed, the air filter must be cleaned or replaced. 12. Warning lamp, air filter If the lamp comes on while the engine is running at
full speed, the air filter must be cleaned or replaced.
14. Driving lights, low beam,
switch (Optional) When depressed, the driving lights low beam are
on. 14. Driving lights, low beam,
switch (Optional) When depressed, the driving lights low beam are
on.
15. Driving lights, high beam,
switch (Optional) When depressed, the driving lights high beam are
on. 15. Driving lights, high beam,
switch (Optional) When depressed, the driving lights high beam are
on.
16. Hazard warning lights,
switch (Optional) Where depressed, the hazard warning lights are on 16. Hazard warning lights,
switch (Optional) Where depressed, the hazard warning lights are on
25