Dynapac CA270, Instruction Manual

Page: 25 / 99

Machine description
ICA270-IN2EN1.pdf 2012-11-05
Machine description
Identification
1
1
Fig. Front frame
1. PIN
Product identification number on the frame
The machine PIN (product identification number) (1) is
punched on the right edge of the front frame or the
upper edge of the right frameside.
1
Fig. Operator platform
1. Machine plate
Machine plate
The machine type plate (1) is attached to the front left
side of the frame, beside the steering joint.
The plate specifies the manufacturers name and
address, the type of machine, the PIN product
identification number (serial number), operating
weight, engine power and year of manufacture. (If the
machine is supplied to outside the EU, there are no
CE markings and in some cases no year of
manufacture.)
Fig. Machine plate
Please state the machine's PIN when ordering
spares.
17