Dynapac CA270, Instruction Manual

Page: 39 / 99

Machine description
ICA270-IN2EN1.pdf 2012-11-05
Fuses
Fig. Fuses boxes.
F1
F2
The figure shows the position of the fuses.
The table below gives fuse amperage and function. All
fuses are flat pin fuses.
The machine is equipped with a 12V electrical system
and an AC alternator.
Fuses in boxes F1 Fuses in boxes F1
1.
Emergency stop, ECU, reversing alarm,
neutral position, seat switch, vibration 15A
5.
High/Low speed 10A
1.
Emergency stop, ECU, reversing alarm,
neutral position, seat switch, vibration 15A
5.
High/Low speed 10A
2.
Horn, buzzer, control panel 10A
6.
Windshield wipers cabin 10A
2.
Horn, buzzer, control panel 10A
6.
Windshield wipers cabin 10A
3.
Reserve
7.
Compaction meter 10A
3.
Reserve
7.
Compaction meter 10A
4.
Rotating hazard beacon 10A
8.
Indicators, warning indicators, cab interior
lightning 10A
4.
Rotating hazard beacon 10A
8.
Indicators, warning indicators, cab interior
lightning 10A
Fuses in boxes F2 Fuses in boxes F2
1.
Working lights 20A
1.
Working lights 20A
2.
Traffic lights: headlight, navigation light,
braking lights, number plate illumination 20A
2.
Traffic lights: headlight, navigation light,
braking lights, number plate illumination 20A
Fig. Battery disconnector/fuse box in
cooler compartment.
9. Fuse
9
Fuses, battery disconnector/fuse box (Cab)
To access the fuse (9), remove the front of the battery
disconnector/fuse box by unscrewing the screws. Pull
off the top of the fuse holder to see the fuse.
9 50 A Main fuse for cab 9 50 A Main fuse for cab
31