dynafor LLX2, Operation And Maintenance Manua

Page: 66 / 148

30
7.5.7 Association of components
7.5.7.1 Adding one or more sensors
a) Adding sensors operating on the same channel as the Master display unit.
Using the arrows, move to the icon , confirm and follow the procedure described hereafter:
b) Adding sensors operating on a different channel to the Master display unit.
Confirm the selection
Associate several components:
Once the general procedure has been
followed, the sensors operating on the
same channel as the Master unit are
automatically associated.
= The sensor / display couple is
associated.
You can dissociate components:
= The sensor / display couple is
dissociated.
ESC
Return to standard display
Select an icon and enable the
available options
Select an icon and enable the
available options
Confirm the selection
Adding sensors:
Go to the parameter setting menu
and select option
+
Confirm with
ESC
Return to previous window
Select an icon and enable the
available options
Select an icon and enable the
available options
No action
Scan environment:
The display unit scans all of the
channels other than its own and
identifies all the sensors, unlocked
or disassociated, within an 80 m
radius.
ESC
No action
No action
No action
Confirm the selection
Identification of the sensors present:
The first five sensors that are powered up,
unlocked or disassociated, present with a
radius of 80 m are displayed on the
screen. If there are more than five, select
the "others" line (or "start of list") and
confirm to display all the sensors present.
XXXXXXX = Serial No.
2t / 0t5 = capacity
MM YY = calibration date
ESC
General reset with no addition
of sensor
Select an icon and enable the
available options
Select an icon and enable the
available options
42
43
44
45
GB