dynabook E10-S, Maintenance Manual

Page: 56 / 133

3. dynabook WPETD Operation 3 Diagnostic Programs
3-9 Maintenance Manual Satellite Pro E10-S / dynabook E10-S
3-3-2 Each item for the operations

[All Items Check] check box Check this box, you can select or deselect all test items.

[All Detail Check] check box Check this box, you can select or deselect all test items in detail.

[Multitask] check box Only for Aging tests.
If you check this box, the selected Aging-tests will run simultaneously.
If you uncheck it, the selected Aging tests are executed one by one.

[Pass Count] edit box Only for Aging tests
Set the number of times for a test, which allows you to specify from 1 to 999.
Each Aging test runs until reaching "Pass Count" you set.
If you also set "Multitask" option, all selected Aging tests will keep running until
when the last one reaches the "Pass Count".
However, if an Aging test gets error 10 times, the test item will be terminated.

[CPU Stress] check box Only for Aging tests
Checking this box applies some stress to the CPU during the test.

[Set Battery Off At the End] check box if you check this box, it will run battery off test/setting once at the end of all tests.
Default is checked. And it will be grayed out and unchecked if no battery or the
running PC cannot be supported (Currently only Taikan10 model is supported) by
this item [Set Battery Off At the End].

[START] button Start the test.

[LOG] button Shows the detailed test result or to save it.

[STOP] button Stops the test during the execution.
This button is effective for each Aging test and at the interval between two Non-
Aging tests.

Diagnostics Time The elapsed time for the test