dynabook E10-S, Maintenance Manual

Page: 122 / 133

4.3B
attery Pack
4 Replacement Procedures
4-9 Maintenance Manual Satellite Pro E10-S / dynabook E10-S
Install Battery Pack
Install battery pack according to the following procedures and Figure 4-3.
1. Check whether the cable is pressed by the battery.
2. Place Battery Pack in correct position.
3. Secure Battery with four CM2.0X4.0Xφ4.0X0.5 silvery Phillips head screws.
4. Connect Connect the battery interface (J2) cable
5. battery interface (J2) cable Not higher than the screw hole
CAUTION: The battery packs contain a lithium ion battery, which can explode due to
improper replacement, use, handling, or disposal. Always dispose of the battery packs as
required by local ordinances or regulations. Use only replacement batteries
recommended by DBH.
NOTE: Visually check the battery's terminals. If they are dirty, clean them with a dry
cloth.
NOTE: Dispose of the used battery packs as required by local ordinances or
regulations.