dynabook E10-S, Maintenance Manual

Page: 108 / 133

3 Diagnostic Programs
3-13 Maintenance Manual Satellite Pro E10-S / dynabook E10-S
4.2 How to startup the Taikan Maintenance Tool
4.2.1 Startup Procedure
1) Create a bootable USB flash media of the WinPE Maintenance Tool according to the Create Procedure above.
2) Insert the created USB flash media to the target PC that needs maintenance and then turn on the power.
3) After turning on the power, immediately press the [F12] key several times to show the boot device selection screen.
4) Select "UEFI: <USB flash media name>" and press the [Enter] key.
(Below “UEFI: ADATA USB Flash Drive 0.00, Partition 1” is the created USB flash media as an example.)
5) The Taikan Maintenance Tool starts up.
6) After WinPE booted up, the initial screen (main menu) is shown like below:
This PC’s info:
Name Information
------------------------- --------------------------------------------------
BIOS version “1.30”
System manufacture “Dynabook Inc.”
System product “SATELLITE PRO E10-S”
System version “PYTPPE-AAA14”
System Serial number “21172643H”
System UUID “00020003000400050006000700080009h”
System SKU number “PYT00E”
OEM String “PTY00E-AAA14,R20700H2Z00#B”
GSW String “GSW:1000000000”
System date & time 2021/05/10 03:37
********************************************************************************
* Replacing the motherboard *
* 1 – BIOS Update for DBIEMD00 (Using BIOS Ver.: 1.30) *
* 2 – DMI Update *
* ---------------------------------------------------------------------------- *
* Not Replacing the motherboard *
* 3 – BIOS Update for DBIEMD00 (Using BIOS Ver.: 1.30) *
* ---------------------------------------------------------------------------- *
* 40 – Reboot & Enter BIOS Setup *
* 50 – Shutdown *
******************************************** Ver. 1.00 (for Taikan10) **********
Input Number & Press [Enter] key: