. .
Dyadic Systems – Mechatronics Cylinder Manual
MF
-005500-EN-53/63
6.3. Specification of SIO
In case of use of SIO, please refer the enclosed manual of “Termi-BUS Interface”.
6.3.1. Summary
Electrical specification: Compatible with RS485
Speed:
Selectable in the range of 9.6 kbps ~ 115.2 kbps
(9.6 kbps only after the BREAK order)
Synchronizing method: Micro timing adjusting method
Data (1 character) length:
8 bit
Parity:
None
Start/Stop bit:
1 bit
Xon/Xoff: Non
Pallet length:
16 characters
(Structure: STX + data 12 char check sum 2 characters x etx)
Connection type:
BUS connection (multi point connections: Max 16 axes)
Connectors:
Connectors made by AMP company
Mechatronics Cylinder Connector Pin Layout
No. Name
Functions
1 +5V
2 TRx+
Transmitter/R
3 5G Signal
Ground
4 TRx-
Transmitter/Receiver-
7. Support equipment
7.1. PC Tool (Model: TBVST-EN-SET)
PC Tool is a PC software kit to operate JOG and other set up for single axis.
(1) Contents of PC Tool, Model: TBVST-EN-SET (see red circle in the following figure)
①
-1 PC Setting Tool
:
TBVST-EN
(to install it in PC for Online operation)
①
-2
Offline Setting Tool
:
CTA-1EX
(to install it in PC for Online/Offline operation)
①
-3
PC PLC Software
:
CTC-Tool
(to install it in PC for sequence program)
①
-4
Motor Set Up Tool
:
MVST-EN
(to install it in PC for RSA servo motor set up)
②
RS232/RS485 Adaptor :
ADP-1
(to connect with PC serial port)
③
Connector Junction
:
ADP-2-4
(Junction for cables)
④
ADP Cable (1m)
:
RP9050-010
(to connect Mechatronics Cylinder and ADP-2-4)
⑤
SIO Cable (1m)
:
RP9041-010
(to connect ADP-1 and ADP-2-4)
Programming software
(TBVST-EN)
Connect with DC24V Power Supply
Connect ILLK terminal with +24V
Connector Converter
（
ADP-2
）
SIO Cable, 1m
(RP9041-010)
ADP Cable, 1m
(RP9050-010)
RS232/485 Converter
(ADP-1)
Tool kit Circled in Red
