Configuration and Operation
45
9.2.1.7.3
Factory Default
The
Factory default
screen is shown below. Follow the instructions to reset the camera system
settings to factory default settings if needed.
Figure 42: Factory Default Screen
Full Restore
Click
FULL RESTORE
to restore the factory default settings of the camera system. The system restarts
in 30 seconds.
Note:
The IP address and all other settings will be restored to factory default settings.
Partial Restore
Click
PARTIAL RESTORE
to restore the factory default settings of the camera system, but save the
network settings. The system restarts in 30 seconds.
Analytics Restore
Click
ANALYTICS RESTORE
to reset the analytic firmware.
Reboot
Clicking
REBOOT
restarts the system without changing current settings.
Note:
Analytics firmware is stored in a separate file than the camera system firmware. To backup and
restore the analytics firmware version, see
9.2.1.7.4
Software Version
The current version of the camera system software is displayed in the
Software version
screen.
Figure 43: Software Version Screen
Note:
To view the analytics firmware version, see
