Adjusting and Framing-Up the Camera View
19
8
Adjusting and Framing-Up the Camera View
After the camera is connected to the network and is running, it is necessary to frame-up the scene
and adjust the camera settings to optimize the picture for the individual scenes. If Latitude is being
used, consider scheduling different settings for changing ambient conditions throughout the day,
week, month or seasons.
To adjust and frame-up the camera view
From the unit’s
Camera > Exposure
screen, do one of the following:
If you selected Shutter WDR
On
from the
. screen, select the default
mode (
WDR Multiple Shutter)
.
If you selected Shutter WDR
Off
from the
.screen, select the default
mode (
Auto Shutter)
.
Save changes and complete the focusing steps.
Tip:
To view greater image detail for more accurate high-definition focusing, on the
web interface
Home
page, click the
Full Screen
button and use the full
screen view to check the focus.
Adjust the pan and tilt:
Loosen the tension screw on the mounting bracket.
Figure 16: Mounting Bracket
Rotate (pan and tilt) the camera so that the Field of View is optimized for your
scene.
Figure 17: Rotating the Camera
Tighten the tension screw to hold the camera in place.
When finished, set your exposure settings as needed.
