Configuration and Operation
39
Alarm Output
Define the normal alarm output signal as
Normal close
or
Normal open
, according to the current
alarm application.
Normal open
is the default setting. Click
SAVE
after configuring the settings.
Triggered Action
The Administrator can specify various alarm actions to take when an alarm is triggered. The
following options are available:
Note:
This option is valid only when using MJPEG as the camera stream.
When an alarm is triggered, event images are uploaded to the designated FTP site. Follow these
steps:
From the
FTP address
drop-down list, select one of the two FTP addresses to use.
From the
Pre-trigger buffer
and
Post-trigger buffer
drop-down lists, select the
number of frames for the buffer from 1-20 frames.
Figure 34: Triggered Action – Upload Image by FTP
Select the
Continue image upload
checkbox to upload an image by FTP for a defined
period of time or while the trigger is active. Select one of the following options:
To specify the length of time for the upload, select
Upload for
and enter the
number of seconds in the text box.
To upload while the trigger is active, select
Upload while trigger is active.
In the
Image Frequency
text box, from the drop-down list select the number of
frames per seconds from 1-15 for the upload.
Note:
Make sure that FTP configuration has been completed. See
