Outdoor Camera Installation
101
Step 12:
Stuff the cables into the base. Then connect the wire from the cover to
the screw on the base.
Step 13:
Close the cover and align the arrows.
Step 14:
Align the two screw holes of the camera’s mounting arm with the screw
holes on the Junction Box cover. Fasten the mounting arm to the cover
with the M4 mechanical screws.
Step 15:
Fasten the thread-lock sealing nut tightly with a spanner until the cable is
completely covered. Coat the joints between the cable gland and the cables
with silicone gel to waterproof them.
Step 16:
Rotate and point the camera to the desired direction. The
installation is completed.
