CB-5222 User and Installation Guide
34
To enable the SNMP v3 protocol, enter the appropriate data and passwords requested:
Enable SNMP v3
– Select the checkbox.
Security Name
– See note below.
Authentication Type
– Select MD5 or SHA from the drop-down list. See note below.
Authentication Password
– See note below.
Encryption Type
– Select DES or AES from the drop-down list. See note below.
Encryption Password
– See note below.
Note:
You may have to consult with your System Administrator to activate this function.
Traps for SNMP v1/v2/v3
Traps are used by the camera to send messages to a management system for important events or
status changes. Configure the following settings as required:
Enable traps
– Check this box to activate trap reporting.
Trap address
– Enter the IP address of the management server.
Trap community
– Enter the community to use when sending a trap message to the
management system. The default value is
public
.
Warm start
– Select this checkbox if you want the camera to perform a software reload
(warm start SNMP trap).
Click
SAVE
when complete.
9.2.1.3.4
UPnP
The
UPnP
screen enables the Universal Plug-and-Play protocol on your network devices.
Figure 28: UPnP Screen
