DVTEL ioi HD CB-5222, User And Installation Manual

Page: 92 / 120

Configuration and Operation
79
Note:
Actions related to an analytic event that is defined in this screen are not affected by the status
of the alarm switch configured on the
Events Setup > IO screen.
To define an action
From the Action drop-down list, select one of the following Actions. The selection is
displayed at the top of the screen.

Activate relay output
Select Activate relay immediately or enter the number of seconds (1-999) in
After x seconds drop-down list.
Select the Relay number.
Select the Activation signal:

Continuous – From the drop-down list, select On or Off .

Pulse activation – In the Sec. text box, enter the number of seconds for the
Pulse duration.
Click APPLY .
 Clear alarms
Select Clear alarms immediately or enter the number of seconds (1-999) in After
x seconds drop-down list.
Click APPLY .
 Arm camera
Select Arm immediately or enter the number of seconds (1-999) in After x
seconds drop-down list.
Click APPLY .
 Disarm camera
Select Disarm immediately or enter the number of seconds (1-999) in After x
seconds drop-down list.
Click APPLY .

Enable detection rule
Select Perform immediately or enter the number of seconds (1-999) in After x
seconds drop-down list.
Click APPLY .
 Disable detection rule
Select Perform immediately or enter the number of seconds (1-999) in After x
seconds drop-down list.
Click APPLY .