Duplomatic EDM-M*/30 Series, Startup Manual

Page: 25 / 29

Duplomatic MS S.p.A . ▪ ED M-M*/30 Start- up Manual ▪ 89251/218 ETM ▪ Jun 2018
page 25 of 29
PROCESS DATA (monitoring)
The process data are the variables which can be continuously observed on the monitor or on
the oscilloscope.
Command Description Unit
SIGNAL
SIGNAL1
SIGNAL2
Command value after input scaling
Command1 value after input scaling (M3)
Command2 value after input scaling (M3)
mA
%
SIGNAL_PIN
SIGNAL1_PIN
SIGNAL2_PIN
Command value at pin input
Command value 1 at pin input
Command value 2 at pin input
V or mA
CURRENT
CURRENT_A
CURRENT_B
CURRENT1
CURRENT2
Output current of solenoid
Output current of solenoid A (CH1) (M2)
Output current of solenoid B (CH2) (M2)
Output current of solenoid CH1 (M3)
Output current of solenoid CH2 (M3)
mA
CURRENT_ERR
CURRENT_ERR_A
CURRENT_ERR_B
CURRENT1_ERR
CURRENT2_ERR
Current error solenoid CH1
Current error solenoid A (CH1) (M2)
Current error solenoid B (CH2) (M2)
Current error solenoid CH1 (M3)
Current error solenoid CH2 (M3)
%
PWM_DUTY
PWM_DUTY_A
PWM_DUTY_B
PWM1_DUTY
PWM2_DUTY
Percentage of PWM on solenoid CH1
Percentage of PWM on solenoid CH1 (M2)
Percentage of PWM on solenoid CH2 (M2)
Percentage of PWM on solenoid CH1 (M3)
Percentage of PWM on solenoid CH2 (M3)
%
TEMP_BOARD Temperature of the board °C
TEMP_PWRSTG Temperature of the power stage of the board °C
V_CTRL Supply voltage V
V_PWRSTG Power stage voltage V