page 16 of 29
Duplomatic MS
S.p.A
. ▪
EDM-M*/30 Start-
up Manual ▪
89251/218
ETM ▪
Jun 2018
EBC configurator software
This is the software for EDM-M parameters configuration.
EBC software is a graphical interface for digital communication, diagnostic tasks and
parameterization.
In addition to the features available on the app, it offers advanced diagnostic programs and an
oscilloscope with measure functions, and allows to save and import parameters sets, as
needed for fast card replacement and for the reduction of start-up time of the system.
The software is distributed inside the EDMPC/30 kit and is also available for download at:
http://www.duplomatic.com/en_US/download/software-download/
System Requirements & Settings
The EBC software can be installed on every machine equipped with Microsoft OS: Windows 7,
8 and 10, a free USB port to connect the communication cable (standard cable type USB A
–
micro USB B).
Launch the setup file and follow the guided procedure to install the program and USB drivers.
Complete driver setup and restart the machine if requested before connecting the module to
the PC.
At the end of installation, a security alert could appear, asking to define permissions for
firewall, depending on your OS and notebook configuration.
See software literature (inside software pack) for EBC configuration software.
Please note that for programming purposes, the EDM card can be powered directly through
the USB port. Leds blink all together for signalling the USB communication.
If you need to energize the valve simultaneously, you need the power supply to pins 1/2.
