page 22 of 29
Duplomatic MS
S.p.A
. ▪
EDM-M*/30 Start-
up Manual ▪
89251/218
ETM ▪
Jun 2018
Output signals
CURRENT
Command
Parameters
Unit
User Level/Group
Default
CURRENT
200
–
CURRENT_LIM
mA
USR / M1-M2
According with the
ordered code
CURRENT1
CURRENT2
200
–
CURRENT1_LIM
200
–
CURRENT2_LIM
mA
USR / M3
According with the
ordered code
It set the nominal current of the coil connected. The current can be then adjusted by parameters
for
“
Curve adjustment
”
.
CURRENT and RESIST values are internally used by the card for an optimum current control loop.
For a correct behavior, EDM-M model must be ordered with the nominal current as close as
possible to the nominal current of the coil.
CURRENT_LIM value is a parameter set by the manufacturer according with the model of
ordered card.
RESIST
This value returns the nominal resistance of the coil. It is exploited to optimize the control
algorithm. RESIST is a read-only parameter, valorised in factory and is dependent on the
ordered card version.
