manualshive.com logo in svg

Duplo DF-1000, Instruction Manual

The Duplo DF-1000 is a versatile machine that simplifies your document folding needs. With its user-friendly interface, it guarantees precise and efficient folding every time. For detailed instructions on its operation, you can easily access the Instruction Manual, available for free download at manualshive.com.

Share
Download
background image

4-20

4.  ERROR MESSAGES

(3)  When the folding plate is not set correctly

“F.PLATE SET ERR”

<Solution>

Set the folding plate again.

(2)  When paper runs out on the paper feed tray

“NO PAPER”

<Solution>

Stack paper on the paper feed tray.

(4)  When level sensor, separating air, and separator adjusting
 

lever and adjusting knobs are not at their correct positions

“FEED ERROR”

<Solution>

Adjust the adjusting lever and the adjusting knobs according to the paper type.
Adjust the height of the separator while checking its distance from the suction belt.

Paper

Folding plate connector

Folding plate

Lock lever

Level sensor adjusting lever

“2” side

“1” side

Separating air adjusting knob

Separator adjusting knob

“3-2.  When  Paper  Jams  Inside  Unit” 
( 

 p.4-15)

 

Summary of Contents for DF-1000























































































Reviews:

No comments

Related manuals for DF-1000

Brands by name

Popular brands

Load more brands