Duplo DF-1000, Instruction Manual

Page: 49 / 86

3-21
2
Press the speed key and select
“CORRECTED”.
3
Press the stop key and register the
setting.
“ ” mark is displayed at the bottom of the LCD.
< THICK PAPER >
CORRECTED
4. FUNCTION SETTING MODE
<Returning setting to “NOT CORRECTED”>
< THICK PAPER >
NOT CORRECTED
2) Press the stop key and switch the setting to “NOT
CORRECTED”.
4-8. Thick Paper Stopper Correction Setting
Setting this setting to “CORRECTED” correct the folding stopper positions of both folding
plates 1 and 2 by +0.5 mm. At shipment, this is set to “NOT CORRECTED”.
<Example> When using thick paper, it is often necessary to correct the folding stopper
position to the + direction. In such cases, correction of +0.5 mm may be possible
without using the folding stopper adjusting key.
1
Press the mode key and select “THICK
PAPER”.
���������������
����������������
A4 +0.5/+0.5
STAND BY
Even if set to “CORRECTED”, folding misalignment may occur due to such conditions as
using environment (temperature, humidity), paper thickness, paper type, paper state, and
processing speed. In this case, refer to Chapter 4 TROUBLESHOOTING “1-2. Correcting
Folding Misalignment Along Vertical Length of Paper” (
p.4-5).
1) Press the mode key and select “THICK PAPER”,
and then select “NOT CORRECTED” using the
speed key.