Duplo DF-1000, Instruction Manual

Page: 47 / 86

3-19
< QUANTITY >
NORMAL
4. FUNCTION SETTING MODE
< QUANTITY >
HIGH
4-6. Stacking Amount Setting
Function which changes the amount of paper stacked on the paper feed tray in three levels.
The distance descended by the paper feed tray when paper runs out changes according to
the setting. At shipment, this is set to “HIGH”.
The number of sheets stacked for each setting is as follows for fine quality paper 81.4 g/m
2
or
equivalent.
“HIGH” : 1000 sheets
“NORMAL” : 600 sheets
“LOW”
: 300 sheets
<Example> To decrease the amount stacked when the number of sheets used for one folding
operation is little and folding is to be carried out while changing the paper type
������������
����������������
2
Press the speed key and select
“NORMAL” or “LOW”.
3
Press the stop key and register the
setting.
2) Press the stop key and switch the setting to “HIGH”.
1
P r e s s t h e m o d e k e y a n d s e l e c t
“QUANTITY”.
<Returning setting to “HIGH”>
1) Press the mode key and select “QUANTITY”, and
then select “HIGH” using the speed key.