Duplo DF-1000, Instruction Manual

Page: 31 / 86

3-3
1. STANDARD FOLDING OF NON-STANDARD PAPER
6
P r e s s t h e m o d e k e y t o d i s p l a y
“LENGTH” on the LCD.
7
Using the numerical keys, enter the
length of the paper.
The paper length which can be entered ranges
from 182 to 432 mm.
If the value entered exceeds the allowable
range, the buzzer sounds and the LCD shows
“TOO LONG” or “TOO SHORT”.
8
Press the stop key.
The entered paper length is registered, and the
value is displayed at the top left of the LCD.
If a paper length has already been
registered, press the clear key to
clear this value before entering the
length with the numerical keys.
����������
����������������
����������
����������������
����������������
��������
The paper length data registered is
erased when the power is turned
off. To save the registered data,
set the last time fold mode at the
function setting mode screen.
(Refer to “4-2. Operation Mode
Setting” (
p.3-12).)
����������
����������������
<Canceling non-standard paper length setting>
1) Press the mode key to display “LENGTH” on
the LCD.
2) Press the clear key to display “OFF”.
3) Press the stop key.
The unit returns to the automatic paper size
detection mode.