4-4
1. CORRECTING FOLDING MISALIGNMENT
1
Open the top cover L.
2
Switch the position of the adjusting
k n o b a c c o r d i n g t o t h e p a p e r
thickness.
Set to the “top” position when using fine quality
paper above 127.9 g/m
2
and to “bottom” position
when using paper thinner than this. However
switch while checking the folding misalignment.
(3) Using the skew roller spring pressure adjusting knob
3
Close the top cover L.
4
Close the top cover L.
5
Tighten the skew roller fixing knobs.
6
Perform test folding and check that the folding misalignment has improved.
Skew roller spring
pressure adjusting knobs
After completing folding operations, be sure to return the needle back to the standard
position.
Be sure to set the left and right
knobs at the same position.
Above 127.9 g/m
2
Less than 127.9 g/m
2
Summary of Contents for DF-1000
