Duplo DF-1000, Instruction Manual

Page: 26 / 86

2-6
1. STANDARD FOLDING OF STANDARD PAPER
11
Press the speed key to set the
processing speed.
Five speed can be selected (Speed 1 to 5).
Every time the “+” key is pressed, the speed
lamp lights up towards the right and the
speed increases. Every time the “–” key is
pressed, the speed lamp lights up towards
the left and the speed decreases.
When the power is turned on, the speed used
the last time is displayed.
Speed 1 Speed 5
Speed 1 lamp blinks
(When set slower than
speed 1)
Speed 5 lamp blinks
(When set faster than
speed 5)
When using thin and flimsy paper, setting the speed to 5 may cause problems
such as paper jam and deformed folding. Set to lower speeds.
The speed can be set faster than 5 or slower than 1. (This setting becomes invalid
when the power is turned OFF, and when the power is turned ON again, it will be
set to speed 5 or 1.)
<To set faster than speed 5>
*1
1) Press the “+” key until the speed 5 lamp lights up.
2) Press and hold the “+” key for more than three seconds. The lamp will stop lighting and
start blinking.
To return to speed 5, press the “–” key once. The lamp will start lighting.
<To set slower than speed 1>
*2
1) Press the “–” key until the speed 1 lamp lights up.
2) Press and hold the “–” key for more than three seconds. The lamp will stop lighting and
start blinking.
To return to speed 1, press the “+” key once. The lamp will start lighting.
*1 : If paper jams frequently inside the unit in the use of thick paper, set the processing speed
faster than speed 5.
*2 : If paper feed error occurs frequently in the use of recycled paper, set the processing speed
slower than speed 1. For details on the use of recycled paper, refer to Chapter 3 APPLIED
USE “3-2. Recycled Paper” ( p.3-9).