Duplo DF-1000, Instruction Manual

Page: 27 / 86

2-7
13
Check the finish of test folding.
Check for folding misalignment using the second
test folded sample.
1. STANDARD FOLDING OF STANDARD PAPER
12
Press the test key to perform test folding.
Test folding feeds two sheets of paper and allows the finish to be checked.
When the test key is pressed, the LCD displays “WAIT” and the folding stopper starts moving to the set
position. When it completes moving, the message changes to “TEST RUN” and test folding starts.
Test folded paper are not counted in the number of sheets processed.
Folded paper
<Normal folding> <Folding misalignment along
vertical length of paper>
<Folding misalignment
along sides of paper>
<Deformed folding>
14
Select the method of using the counter.
The counter can be used in two ways: subtract count and add count.
Enter the number of sheets to be processed using the numerical keys first before beginning operations.
In this case, the counter will be set to the subtract count method. (A period is displayed at the bottom right
where the count is displayed.)
If the clear key is pressed to clear the counter to “0” before beginning operations, the counter will be set to
the add count method.
Up to four digits (9999) can be displayed.
<Counter display for “Subtract count method”> <Counter display for “Add count method”>
If folding misalignments occur, refer
to Chapter 4 TROUBLESHOOTING
“ 1 . C O R R E C T I N G F O L D I N G
MISALIGNMENT” (
p.4-2).