4-15
3-1. When Paper Jams at Paper Feed Tray
3. WHEN PAPER JAMMING OCCURS
1
Press the tray down button to lower
the paper feed tray.
When paper jams and operations stop, the LCD will show the location of the jam.
“JAM FEED SECT”
or
“FEED ERROR”
Near paper feed tray
“
3-1. When Paper Jams at Paper Feed Tray” (
this page)
“JAM INSIDE”
Inside unit or near folding plate
“
3-2. When Paper Jams Inside Unit” (
this page)
“JAM EXIT”
Near stacker unit
“
3-3. When Paper Jams at Stacker Unit” (
p.4-18)
2
Remove the jammed paper.
If difficult to remove, open the top cover L and
remove.
Paper
Tray down button
Top cover L
3-2. When Paper Jams Inside Unit
I f p a p e r j a m s f r e q u e n t l y i n s i d e
the unit in the use of thick paper,
after removing the paper, set the
processing speed faster than speed
5. With the speed 5 lamp lit, press and
hold the “+” speed key for more than
three seconds, and the lamp will stop
lighting and start blinking.
Speed 5 lamp blinks
(When set faster than speed 5)
Summary of Contents for DF-1000
