3-6
2. CUSTOM FOLDING
6
Set the rear guide at the trail edge of the paper.
7
Press the custom folding registration
key 1 or 2 until the buzzer sounds
“pi.pi...” to switch to the custom
folding mode.
8
Set the folding stopper positions.
Press the “+” key of the folding plate 1 folding
stopper adjusting key and move the folding
stopper to the measured dimensions A (200
mm) of the sample.
Press the “+” key of the folding plate 2 folding
stopper adjusting key and move the folding
stopper to the measured dimensions B (95 mm)
of the sample.
The position moved to by the folding stopper is
displayed in mm on the LCD.
9
Set the position of the stacker roller.
The position of the stacker roller needs to be
changed according to the folded paper length.
Selecting and pressing a numerical key (1 to 7)
while pressing the stop key moves the stacker
roller to the position set. Refer to the following
table for approximate set positions.
In this example, the folded paper length C is 105
mm. Therefore press the numerical key 3 while
pressing the stop key.
CF-1 200.0/ 95.0
STAND BY
Stacker roller
Numerical
key setting
Folded paper
length (mm)
1
∗
2
To 80
3
81 to 110
4
111 to 140
5
141 to 170
6
171 to 210
7
211 to 250
Approximate stacker roller set position
∗
Use numerical key “1” if paper jams at the “2” position.
����������������
��������
For details of steps 3 to 6, refer to “1-3. Operation Procedure” in Chapter 2 BASIC
OPERATION “1. STANDARD FOLDING OF STANDARD PAPER” (
p.2-3).
Summary of Contents for DF-1000
