Duplex Standard 340, Instructions For Use And Maintenance Manual

Page: 55 / 196

Figure 1.6
Figure 1.7
DUPLEX 340-420-620
55
8
7
ENEN
When assembled the machine must look like the following drawing.
5. Adjust the screw of the register located underneath the lever ( 7 ) of the handgrip, at the same
time paying attention to the movement of the feelers ( 8 ) that allow the liquid to exit from the
tanks.
6. Make sure that the feelers ( 8 ) remain flush with the side panel when the lever ( 7 ) is not
pulled down.
IMPORTANT!
If the feelers protrude it may not be possible to insert or extract the tank
containing the liquid from their housings. Use a screwdriver on the feelers
to adjust their position either inwards or outwards.
STANDARD STEAM STEAM PLUS TEKNA