Ducati PANIGALE V4 Owner'S Manual Download Page 91

Page: 91 / 331

Average Fuel Consumption (CONS. AVG 1)

To select this function in the Function Menu, scroll the

functions available using buttons (1) and (2) to display

“CONS. AVG 1”.
The instrument panel calculates and shows vehicle

average fuel consumption.

The average consumption is displayed with the

indication "CONS. AVG 1” and the indication of the

unit of measurement (km/l or l/100 km or mpg UK or

mpg US).

The calculation is made considering the quantity of

fuel used and the distance travelled since TRIP 1 was

last reset.

When TRIP 1 is reset, the value is reset and the first

value available is displayed 10 seconds after the reset.

During the first 10 seconds when the value is not

available, on the display, three steady dashes “- - . - "

steadily as average fuel consumption.
The active calculation phase occurs when the engine

is running, even when the vehicle is stopped.

Moments when the vehicle is not moving and the

engine is off are not considered.
If button (4) is pressed when average fuel

consumption is displayed, the instrument panel will

activate the warning "CONS.AVG 1 RESET ?" in place

of the value and unit of measurement. When this

warning is active, Function Menu scrolling is not

possible.

If you press button (1) or (2), the instrument panel will

display CONS. AVG. 1 again, without resetting the

value.

If button (4) is pressed, the value of CONS. AVG 1 is

reset and the instrument panel will display CONS.

AVG 1 with “0.0” and the set unit of measurement.

SPEED AVG 1

km/h

130

CONS.AVG 1

km/L

16.8

TRIP 1

137.4

Fig. 31

Summary of Contents for PANIGALE V4












































































































































































































































































































































Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands

Ducati PANIGALE V4, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands