Ducati PANIGALE V4 Owner'S Manual Download Page 154

Page: 154 / 331

strong, the display will switch to white background; if

the external lighting is poor, the display will switch to

black background ”.

Select DAY (day mode) to permanently set display

"white" background for improved readability -

recommended in conditions of strong ambient light.

Select NIGHT (night more) to permanently set display

black background for dimmed visibility -

recommended in case of poor ambient light and/or at

night.

Note

In case of battery off, when the voltage is

restored and upon next Key-On, back lighting will

always be set on "AUTO" mode.

153

Summary of Contents for PANIGALE V4












































































































































































































































































































































Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands

Ducati PANIGALE V4, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands