![background image](http://html1.mh-extra.com/html/ducati/panigale-v4/panigale-v4_owners-manual_2537727069.webp)
DSC
The instrument panel displays DSC status through
the “Parameter and level change menu” page 53:
-
if the DSC is active, the “DSC” indication and the
set intervention level number “1” to “2”;
-
if DSC is active, but system is in degraded
operation, the “DSC” indication and the number,
“1” to “2” (flashing); also the DAVC warning light
(8, starts flashing;
-
when in fault, the “DSC” indication and the red
"Err" message;
-
if the DSC is disabled, the “DSC” indication and
“OFF” message; also the DAVC warning light (8,
turns on.
Warning
In case of system malfunction, contact a Ducati
Dealer or Authorised Service Centre.
Note
If DTC is set to OFF, DSC is also forced to OFF.
The Ducati Slide Control (DSC) system assists the
rider during the acceleration when exiting a curve in
order to better control the side slipping of the rear
wheel. The system thus improves the intervention of
the single DTC function that works on the tyre
longitudinal slipping providing better assistance in
extreme riding conditions.
The DSC system works on 2 different levels, each
calibrated to offer a different intervention on the side
slipping of the tyre in combination with a specific DTC
level.
0
11:34
A.M.
RACE
Lap Off
RPM X 1000
Gear
km/h
N
10
9
8
7
6
5
4
3
2
1
11
12
13
14
15
DSC 2
DWC 8
EBC 3
SETTING MENU
TRIP 1
TOT
km
1245
137.4
km
LO
HI
Fig. 24
68
Summary of Contents for PANIGALE V4
