Ducati PANIGALE V4 Owner'S Manual Download Page 274

Page: 274 / 331

Main use and maintenance

operations

Removing the fairing

To carry out some maintenance or repair operations,

some motorcycle fairings must be removed.

Warning

Failed or incorrect refitting of one of the

removed components could cause its sudden

detachment while riding resulting in loss of control of

the motorcycle.

Important

At every reassembly, to avoid damaging the

painted areas and the Plexiglass windscreen, always

place the nylon washers at the retaining screws.

Important

Have the fairing removal performed at a Ducati

Dealer or Authorised Service Centre.

273

Summary of Contents for PANIGALE V4












































































































































































































































































































































Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands

Ducati PANIGALE V4, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands