Ducati PANIGALE V4 Owner'S Manual Download Page 199

Page: 199 / 331

Assisted start (Launch Control - DPL)

This Function allows activating the assisted start

function (called DPL - Ducati Power Launch).
By pressing button (12) it is possible to access the

Launch Control menu only if the vehicle speed is

equal to or less than 5 Km/h (3 mph).
In the Launch Control menu, it is possible to select

the desired DPL level (1, 2, 3) by pressing buttons (1)

and (2), and to set the selected level by keeping

button (4) pressed for 2 seconds.

Note

If no change is made in this menu within ten

seconds, the instrument panel will set DPL to OFF

and go back to the previous screen.

DPL on - Level 1

Available launches: 2

Fig. 156

198

Summary of Contents for PANIGALE V4












































































































































































































































































































































Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands

Ducati PANIGALE V4, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands