![background image](http://html1.mh-extra.com/html/ducati/hypermotard-950/hypermotard-950_owners-manual_2537654043.webp)
STANDARD setting, spring preload corresponding
to value A, from the fully closed position (clockwise):
●
rebound: loosen adjuster (1) by 1.5 turns from
max. fully closed;
●
spring preload: the maximum preload allowed
corresponds to value B.
A = 22±2 mm (0.87±0.08 in);
B = 27 mm (1.06 in).
Attention
Avoid a preload exceeding the one indicated
not to affect the reliability of the part.
Attention
Once the preload adjusted, re-tighten the
locking ring nut against adjusting ring nut.
Attention
To turn the preload adjuster ring nut use a pin
wrench. Pay attention to avoid hand injuries by
hitting motorcycle parts in case the wrench tooth
suddenly slips on the ring nut groove while moving it.
Attention
The shock absorber is filled with gas under
pressure and may cause severe damage if taken
apart by unskilled persons.
When carrying a passenger and luggage, set the rear
shock absorber spring to proper preload to improve
motorcycle handling and keep safe clearance from
the ground.
You may find that rebound damping needs adjusting
as well.
B
A
Fig 18
42
Summary of Contents for Hypermotard 950
