Ducati Hypermotard 950, Owner'S Manual

Page: 277 / 288

Performance data
Maximum speed in any gear should be reached only
after a correct running-in period with the motorcycle
properly serviced at the recommended intervals.
Important
Failure to follow these instructions releases
Ducati Motor Holding S.p.A. from any liability
whatsoever for any engine damage or shorter engine
life.
Spark plugs
Make:
NGK
Type:
MAR9A-J
Fuel system
Continental indirect electronic injection.
Throttle body with full Ride by wire system, round
cross-section having a diameter of 53 mm (2.09 in).
Injectors per cylinder: 1.
Firing points per injector: 4.
Fuel supply: 95-98 RON.
Attention
The motorcycle is only compatible with fuel
having a maximum content of ethanol of 10% (E10).
Using fuel with ethanol content over 10% is
forbidden. Using it could result in severe damage to
the engine and motorcycle components. Using fuel
with ethanol content over 10% will make the
warranty null and void.
Brakes
Separate-action anti-lock braking system operated
by hall-type sensors mounted to each wheel with
phonic wheel detection: ABS can be disabled.
FRONT
Front brake discs
Semi-floating 320 mm (12.6 in) twin-disc.
Braking material: stainless steel.
Disc thickness: 4.5 mm (0.18 in).
Maximum wear on disc thickness: 4 mm (0.16 in).
Front brake control
Hydraulically operated by an adjustable control lever
on handlebar right-hand side.
Front brake callipers
Brake calliper make: BREMBO.
Type: M4.32 b.
276