Ducati Hypermotard 950 Owner'S Manual Download Page 253

Page: 253 / 288

Rear turn indicators

Except for USA/CDN version, turn indicators are

LED-type and do not require any maintenance.
USA/CDN versions are equipped with bulb-type turn

indicators.

Proceed as specified in case it is necessary to change

the bulbs.

Undo the screw (4) and detach the lens (5) from the

turn indicator support.

The bulb has a bayonet joint: press and twist counter

clockwise to remove it.

Remove the bulb, then fit the new one by pressing

and turning clockwise until it clicks into its seat.

Refit the lens (5) by inserting the tab in the

corresponding slot in the turn indicator support.

Tighten the screw (4).

Fig 214

252

Summary of Contents for Hypermotard 950

































































































































































































































































































Search results

Summary of Contents for Hypermotard 950

Reviews:

Brands by name

Popular brands

Ducati Hypermotard 950, Owner'S Manual

Search results

Summary of Contents for Hypermotard 950

Reviews:

Brands by name

Popular brands