If the teach-in procedure is completed correctly, the
instrument panel shows “Completed” followed by
the previous screen after a few seconds.
Note
During the calibration procedure, if the vehicle
speed exceeds 62 mph (100 km/h), the procedure will
stop.
Note
During calibration, the procedure can be
aborted and user can go back to standard screen by
pressing button (1) for 2 seconds.
Note
If during the calibration procedure a vehicle
key-off is performed, the procedure will stop and
end with negative result.
If the calibration procedure is aborted by the user,
the instrument panel shows “Aborted” (Fig 160)
followed by the previous screen after a few seconds.
If, on the other hand, an error or malfunction occurs
during the calibration procedure, the instrument
panel shows “Failed” followed by the previous screen
after a few seconds.
Completed
Keep Speed
48 - 52 km/h
and Gear 2
Tire Setting
Sport
50
2
Gear
km/h
1
2
4
Fig 159
Aborted
Tire Setting
Fig 160
199
Summary of Contents for Hypermotard 950
